No products
Top sellers
-
Formsand, spefol
Molding sand is a fine-grained mineral mixture that is permeated with an...
25,88 € -
Refractory plaster
Refractory plaster to cast bronze, brass, glass (fusing, thermoformage)...
14,64 € -
Plaster bandage 12.5cm x460cm
Cut the desired length of the Plaster of Paris. Let it soak in water...
2,78 € -
Doex, phosphorus copper
Phosphorus copper cartridge used to deoxidize and fluidify the bronze...
8,40 € -
-
-
Modelling and casting wax AS135
Modelling and casting waxCan be cast in silicone moldMelting point...
15,33 € -
Patina 516/3, for bronze, brown-black
Patina ready-to-use. Apply with a brush on the bronze, copper,...
5,34 € -
-
Patina 77/2, for bronze, green antique
Patina ready-to-use. Apply with a brush on the bronze, copper,...
5,69 €
Categories
Manufacturers
No manufacturer
Suppliers
No supplier
Viewed products
-
Latex gloves, 100 pc
With talc inside. 100pc
Search "moulding" 24 results have been found.
-
-
Latex thickener
Product to add to latex low or full ammoniaEvery layer of latex can be thickened with latex thickener (1 to 5%)
8,65 € -
Latex low Ammonia
Ammonia is for conservation.Apply the first layer of latex with a brush to prevent air bubbles. The next layers can be applied with a brush, dabbing or pouring.
13,92 € -
Acrylresin, plaster adjuvant
Plasticrète is a water-based acrylic resin that forms a solid mass with the special hardener. Shore hardness A: 82-86 Demold after: 4-15 hrs at 25°C Potlife: 22-30 min. Frost resistance: -18 + 30°C Mixing ratio A: B by weight: 50: 100.
23,00 € -
Plaster bandage 12.5cm x460cm
Cut the desired length of the Plaster of Paris. Let it soak in water during 10-15 seconds, after which the plaster becomes moldable and self-adhesive. Sticks on itself, on skin and all other materials. Cures after 8 minutes.
2,78 € -
PU resin (polyuréthane) PC 26 (2-3min)
2 components (white and yellow)Rapport A+B (weight): 100/100Processing time at 25°C: 3-4 minutesMax recommended thickness; 5mm
23,23 € -
PU resin (polyuréthane) PC 39 (10-15min)
2 components (white and yellow)Rapport A+B (weight): 100/100 Processing time at 25°C: 8-12 minMax thickness recommended: 3-7 mm
25,08 € -
-
-
Vacuum pump 2,5 m³/h + vacuming bin 9 liter
The system consists of: chamber with diameter of 250 mm and height 300mm, see-through lit, vacuumpump, 1 meter rubber hose, vacuum manometer, blocking valve and venting valve.
399,30 € -
Acrylresin, plaster adjuvant
Water-based acrylic resin (used in plasticrete) Can be mixed with the water of the plaster
14,81 € -
Plaster bandage 20m x 8cm
Cut the desired length of the Plaster of Paris. Let it soak in water during 10-15 seconds, after which the plaster becomes moldable and self-adhesive. Sticks on itself, on skin and all other materials. Cures after 8 minutes.
7,59 €
