No products
Top sellers
-
Formsand, spefol
Molding sand is a fine-grained mineral mixture that is permeated with an...
25,88 € -
Refractory plaster
Refractory plaster to cast bronze, brass, glass (fusing, thermoformage)...
17,21 € -
Plaster bandage 12.5cm x460cm
Cut the desired length of the Plaster of Paris. Let it soak in water...
2,78 € -
Doex, phosphorus copper
Phosphorus copper cartridge used to deoxidize and fluidify the bronze...
8,40 € -
Patina 516/3, for bronze, brown-black
Patina ready-to-use. Apply with a brush on the bronze, copper,...
5,34 € -
-
-
Patina 111, for bronze,blue-green
Patina ready-to-use. Apply with a brush on the bronze, copper,...
5,22 € -
-
Categories
Manufacturers
No manufacturer
New products
-
Solder 97% stain, 3% copper, wire 3mm
Solder 97% stain, 3% copper, wire 4-5mm, for stained glass tiffany Given...
3,21 €
Suppliers
No supplier
Top sellers
-
-
PU Foam (polyuréthane) soft
Flexible foam for scenographic and prototype applications. May be mixed as well manually as mechanically. Curing at room temperature.Expansion: 10-12x
40,13 € -
Polyester gelcoat
Polyester resin with high technical properties. Very hard, shockproof, water and chemical resistant. Is applied as first layer on the mold.Use curing agent mek peroxyde
71,06 € -
-
-
-
Trennwax
Trennwax is a solven,t based paste used for the preparation of porous surfaces like wood, concrete and non insulating plaster. Good for epoxy and polyurethane Only after completely dried, polishing or shaping is required (after 30min to 6 hours)
22,89 € -
PVA, polyvinylic alcohol
Release agent. Sealer and strong release agent for polyester resins. It forms a transparent film layer on the to be molded piece and is simply washed away with water. Indispensable while molding with silicones on clay, plaster or stone. Dry in 30 minutes.Use: Apply a thin layer with a brush.
8,05 € -
-
Chopped Strand Mat 300g/m²
Chopped strand mat is used for strengthening the polyester resins. While applying several layers, it is best to apply them in link
6,23 € -
Latex thickener
Product to add to latex low or full ammoniaEvery layer of latex can be thickened with latex thickener (1 to 5%)
8,65 € -
Epoxy resin UV (max 5mm)
Transparent epoxy resin, 2 parts, to cast, UV resistantRatio A/B: 2/1Max thickness: 5 mm
53,18 €
